Feeds:
Posts
Comments

Archive for the ‘Uncategorized’ Category

2008: We buy a house with jungle print wallpaper and tan fixtures in the upstairs extension master bathroom
2009: We prioritize other rooms because they were more public
2010: We prioritize other rooms because they were original to the house
2011: We prioritize other rooms because they were more fun
2012: We prioritize other things because we had a baby
2013: And another baby
2014: We have two babies, probably not a lot is getting done around here
2015: I mean making additional messes? On purpose?
2016: New roof needed, necessitating a new skylight… which got me thinking about that bathroom…

So, while my husband was in the Mediterranean doing a study abroad class for 3 weeks, and we still had a few weeks of full time childcare after our semester ended but just before the public school year did, it seemed like the time had finally come, so I decided to tackle the jungle bathroom.

My two biggest priorities:

1. Say goodbye to the loud jungle wallpaper on the ceiling and in the skylight and closet and everywhere.

2. Try to make the “sand”-colored toilet, bidet, sink, and tile seem lighter by using a dark wall color.

Now, I know that leaf print / botanical wallpaper is very “pinnable” and cute:

Screen Shot 2017-09-02 at 1.22.38 PM.png

And some people might argue (with good reason) that it is a great style. I usually love florals and leaves in fabrics, clothing, textiles, art, and jewelry design. But even though I love Blanche Devereaux:

blanch+golden+globes

After 8 years of staring at it, I felt sure this stuff had to go:

4

Please note that this wallpaper continued ON TO THE CEILING and was even wrapped up IN TO THE TUBE connecting the skylight to the ceiling.  And the adjoining closet ceiling, too. I mean you have to admire the DETERMINATION involved.

5

Peeling begins. The top vinyl layer came off in fairly large chunks, just by picking up a corner and carefully peeling.

6

My trusty Wagner steamer helped with removing the under layer — the soft peach paper layer that was actually glued to the walls.

7

Sorry about the wide range of light levels — these were taken over the course of several different days.

8

Steaming the under layer briefly led to loosening. Notice you can see the leaf print even on the underlayer because it had aged differently where more and less sunlight got through to it.

9

Carpet up, more wallpaper peeled… hi there skylight. Note the wallpaper going on into the closet ceiling as well.

10

This was while roofers had the skylight covered with plastic before they took it out — it really made the room much darker and made me appreciate that the skylight exists.

11

The ceiling was very slow going — I think they must have used some stronger adhesive up here, probably because wallpaper on a bathroom ceiling is a tough job!

12

These small areas were hard as the steamer could not fit into them. Hot water in a handheld spray bottle seemed to work.

13

Skylight peeling in progress. There was some rubbery glue in here that was VERY hard to get off — I think it may have been contact cement.

14

Jesus is that you? (Nope, just skylight replacement day!)

15

New skylight in place for the rain.

16

Now about the rest of that ceiling… (And yes, we have a crazy old Victorian style toilet with an elevated tank, who knows why? I will say it has never clogged in 9 years due to its enormous flush-power, so maybe that is why.)

17

For some reason this back wall was much harder to get right. Slower going than any of the other walls. There truly is a lot of variety in how wallpaper removes, and that is one reason why I will probably never hang it on purpose in any area of my home. It’s just too much of a hassle to get rid of it and make a change.

18

Progress!

19

Steaming inside the skylight was weird, it sort of formed a little cloud.

20

More small areas needing attention.

21

I had read that it is good to use tinted primer before a very dark color. Since we were doing the walls in a very dark blue: Valspar Indigo Streamer, I decided to try it out. Lowe’s paint department agreeably added some black pigment to a gallon of Kilz2 primer I purchased.

22

It already looked a lot better!

23

First sample pot of Indigo Streamer on the walls.

24

One coat down, one to go. This was to try to make that “sand” tone tile look lighter… I felt excited it was starting to work as an optical illusion.

25

So no, this is not a white sink, but it does look lighter to me.

26

Toilet, bidet, sink against the Indigo Streamer walls.

27

Rehung some old IKEA curtains over that giant glass window outside the shower for some privacy (there had been vertical blinds but they were very old and not clean enough to save).

28

I found this image in a 1935 American Standard plumbing catalog online and loved it — now it’s framed in our bathroom! ūüôā

29

Trying to choose some vinyl flooring. We went with vinyl because it was cheaper and we have long term plans to properly redo this bathroom with a soaker tub and new fixtures, so we didn’t want to over-invest in it as is.

30

Stick on tile floors! We chose a groutable vinyl tile to make it look a little more like ceramic.

31

Tile progress.

32

Tile through the adjoining closet — this had been plywood for a couple of YEARS since we had pulled up the carpets for hygiene reasons (Carpet in the bathroom, another thing I will never do intentionally after having dealt with it twice in this house)

33

Some after pics! I stuck a frame from MirrorMate over the builder mirror to make things look a little more finished. It was a quick and easy install, as promised! I chose a chunky style I liked from their discounted options, and spray-painted it with oil rubbed bronze Rustoleum to match the frames and clock.

34

After. It’s still an odd little space (hi, Victorian toilet and bidet!) but at least it’s a lot less junglesome now.¬†All of the trim and the ceiling is painted in Valspar Light Raffia to match the tile and help it read as lighter/whiter.

35

Closet ceiling WITHOUT WALLPAPER! Now painted Valspar Light Raffia.

36

View from the bathroom into the closet.

I’ll finish with a few before-and-after comparisons just for fun.

132

The floor was Armstrong Crescendo peel-and-stick vinyl 12×12 groutable tile in French Gray. It was $1.08 per tile which was convenient, since we were able to overbuy, save the receipt, and then return the tiles we didn’t use. Link to its current listing at Lowes here.¬†We used a grout color called “Mocha” again to avoid bright whites that would make the fixtures look dark.

So that was our rumble in the jungle! I’m so glad it’s over!

(And yes, it took me over a year to get around to posting this! We’re currently working on the downstairs hallway which had pink grasscloth and pale yellow paint on all the built in bookcases… hopefully I can update sooner when that’s complete.)

Advertisements

Read Full Post »

First off, a note on the plural of the word roof. My first thought was rooves but according to the OED, the standard plural in both British and US English is roofs. So roofs it is. (Rooves is still in use and not officially¬†incorrect, though. So that’s my fact of the day.)

So, it’s a little hard to tell, but after a long wait, two large bills, and a lot of drama, we have a new roof! And it came in two stages.

Stage One: Replacing the main shingle roof

After our paint job, this was the primary¬†large maintenance expense we had tried to plan for. As you can see below, this is nice fresh paint (and I still love the colors) but the shingles were unfortunately starting to buckle and come apart a bit as they were a few years past their prime. When we had the house inspected before purchase in 2008, the shingles had been given a 3-5 year remaining lifespan. We pushed that all the way out until the fall of 2015, but it was definitely time. During a big rain, we had to strategically position a bucket¬†in the back bathroom and one in the back storage room, and one wall near a bad join (which I’ll get to later) would suddenly develop random drips coming down the wall. It was especially bad near one chimney, where any really heavy rain had a way of dripping down through the edge of the attic and into one of our closets. Not great.

Untitled

 

So, after much handwringing and saving up, we got 3 estimates and went with a reputable local roofer our home inspector had recommended. He was less expensive because he only does regular¬†shingle roofing, not metal or thermoplastic polyolefin (membrane) roofing, and is a small business owner. He did a great job and was really nice to work with. He even built us a “cricket” which is one of these:

Untitled
No more chimney drips! That raised bit where the roof meets the base of the chimney is the cricket. It basically splits the water draining down the roof surface rather than letting it pool near the side of the chimney, which had been the case before. So far it seems to be doing its job, so hooray for crickets.

Untitled
So smooth and shingley.

He also installed a ridge vent, which helps keep air circulating in the attic and theoretically helps your shingles last longer because they don’t get quite as hot for quite as long.

Our shingle color / brand was Tamko Olde English Pewter¬†– we picked it because it was a light grey that seemed to fit in with the old houses in our neighborhood. Obviously it’s still a modern asphalt shingle but the lighter color seemed to read well against the older roofs around us, some of which are silver-toned metal roofing or old slate – they’re all shades of grey.

 

Stage Two: Replacing the weird back-of-the-house low-slope roof

So the larger, main part of the house had a lovely new waterproof hat on and all seemed well, except for one minor (major) thing: the back of the house had an extension put on it in the 1980s. You can kind of see it in the upper left corner here:

Untitled

 

We really appreciate this extension because it gives us an extra bathroom upstairs, and lets a lot of light in as well in a part of the house that is north facing and could be really dark. But the low-slope on this roof (it had once been a back porch, we think) means that it’s not a good candidate for shingle roofing. There was some rubber membrane roof up there as well, but it was getting old and starting to leak, the join between the rubber roofing and the shingles was especially bad and letting a lot of water in. Here’s the join:

Untitled

And here it is from another angle, in process (you can see the ridge vent at the top): Untitled

Basically, from what we understand, this sort of flattish roof should probably not have been done with shingles in the first place due to the angle. But it was:

Untitled

And because of the flat angle (low slope) of the roof, rain could find its way in to this space. Although the shingles were not super old or in terrible shape, the leaks were finding their way in and that was not fine.

So after another round of estimates only two companies even offered to DO the work since it was so finicky. The answer to our problems (knock on wood) is TPO roofing: thermoplastic polyolefin. It’s a thick plastic membrane roof that is heat sealed and lasts well on low-slope surfaces. Here’s a link about it! It was finally finished yesterday and a new skylight was put in the upstairs bathroom. I don’t have any “after” pics of the plastic yet, but it looks like it does in the link above. We’ve had a ton of rain this week and so far so good.

As the last worker (the skylight guy) was leaving he said “You should be all set for MANY years up there!” and I am definitely hoping he’s right.

 

Read Full Post »

So I was browsing through the American Radiator Company’s “Complete” catalog, which is available in full scanned version here, and it looks like our downstairs bathroom radiator may be installed sideways! Note the original ad (with my highlighting) below:

Image

And the view in our bathroom where three large ones are installed one on top of the other:

downstairs bathroom radiators

Never even crossed my mind that they could go in a different way. I suppose it makes sense that the top pipe curves to the left though, since that would be “down” into the floor. Oh my. I had a moment of panic but then realized if they’ve made it okay for 104 years now, they’re probably alright to last a while longer.

You can see a few before and afters of this bathroom, including the mirror glass we put in the old window to cover old wallpaper, here.

Thanks to Anna of the amazing blog Door Sixteen for posting the radiator catalog link in her awesome post about having old radiators powdercoated – my dream to do throughout this house one day!

Read Full Post »

Our firstborn was about to turn two, and we wanted to give him a birthday party about something he liked. I know that in a year or two we probably won’t have much choice about what “thing” he’s excited about for a party theme, but for this year it was still kind of up to us – so we went for something he always loves to talk about when we are out for a walk or a drive: TREES.

toddlerpartybanner

We had so much fun decorating the dining room up for our “tree” theme. I was so glad it wasn’t still all painted¬†bright blue and salmon pink.

One weird thing is that I was doing a lot of my planning for this party over Christmas break and basically everything tree oriented was also bedecked with candy canes and Santas. I couldn’t find any tree-oriented invitations at any of the usual sites I like to peruse: Minted, TinyPrints, etc. Only Christmas trees or whole gardens.

Luckily trees are very, very forgiving to paint or draw. So I pulled out my watercolor set and poked around a little making some sketched trees and letters and numbers.

ImageImage

Image

Then I scanned them and combined a few, playing around with photo processing software to make our invitations:

Image

Since the place we were printing them, Costco, let you print the back for free, I added a photo from our summer trip to Westonbirt Arboretum and a few party details on the back.

Image

We uploaded them as a 5×7 jpg file and they printed in just a few days, on nice thick paper with rounded corners and free envelopes, and all for a very affordable price compared to the sites I usually look at, or even compared to printing something at home from Etsy.

Since the holiday break is a time when I really should be planning my courses, procrastination meant I did all kinds of little prep things ahead of time that were time consuming but big time fun for my DIY crafting heart.

I decided to make tree crayons.

I ordered a bunch of inexpensive bulk crayons – restaurant packs of 4 colors – from Amazon and broke them up to make tree-shaped crayons for the favors. I have heard that as kids get older there are tons of broken excess crayons and extras from restaurants and whatnot, so I look forward to doing this again sometime. It took about 4 crayons to make one chunky toddler tree crayon. I used this silicone mold and baked them at 200 degrees for about 12-15 minutes. The baking part was too messy and hot to do with toddlers but I think this could be a fun supervised craft for kids maybe ages 4 and older? Also I learned you should do all of the lighter colors first as any small bit of darker wax mixed in leaves a mark on them. No big deal but good to note for the future. Another thing I realized part way through is that the wax is very sloshy when they’re full – instead of melting 4 crayons, for the last few batches I just melted three in each, which made for a shallower crayon, but then when I took them out of the oven and while they were still hot and liquid, I broke a single crayon in half and sank both pieces deep into the pool of melted wax in each mold. This filled up the volume but meant they weren’t as hard to get out of the oven splash-free. Notes for next time, I guess. Anyway it was fun! They don’t take long to cool and you can pop them out and color away.

Image

I ordered some inexpensive brown organza bags from eBay and stuck in a little memo pad for a cute toddler tree favor that will hopefully be used up and not just turn into knick-knacky clutter.

Though I know crayons can become clutter too! There’s no escaping it really.

We made “Ranger Badges” with printable name tag labels (Avery 8395).¬†

I found a big green fabric remnant at my favorite local thrift store for $1.75 and one evening when my mom was visiting we cut simple leaf shapes out of it – we ended up getting 100 leaves out of it – more than we needed. We strung them around and made them into a banner, as well as tacking them up onto the wall as part of our big paper tree in the corner.

Here’s the spread of “tree” themed foods – mostly just green things, or natural things. The tree trunk is brownie, though in hindsight I wish we’d cut it into smaller pieces since only a few people broke off any to eat. The cupcake frosting is from this recipe and I used AmeriColor gel paste food coloring which gave a good saturated color without that weird “dye” taste that some food colorings have.

Here were our drink options, which we called the hydration station: apple juice boxes for the kiddos, Sprite bottles for their pretty green glass, and some sweet tea and ice water for the grownups:

More of the food spread, again going with the green theme – snap-pea crisps, our son’s quirky favorite snack of green olives, and some pretzel “sticks” that also had delicious guacamole foliage my friend Kelly¬†made and brought along for dipping:

I wanted some kind of large tree for the wall, but the options at the party store in town were all too much like inflatable palm trees (college town problems) and the like – and they started at $39.99 which… no. However, I noticed that the long brown sheets of paper that come as padding in Amazon boxes had a sort of barklike texture, so I saved a few and the day before the party my friend Sian and I went ahead and tried tacking some up on the wall along with the extra fabric cut-out leaves. We just used masking tape to hold things up, and it was all very forgiving.

It turned out pretty cute and was a nice anchor point for the room. The poster I wanted (Sequoia National Park WPA poster from the 30s) was not available online in a big size for less than $80, which, well, no, so I just printed a mock-up version for the party on our regular printer via blockposters– it had paper cut lines all through it so it wouldn’t work for a real art print, but it was definitely good enough for a party decoration.

Since my son has been enjoying a few “glue dot” type crafts at preschool lately, I thought we could probably do one as a craft activity for the group, gluing leaves onto some basic bare trees. I was going to buy a leaf punch but realized I would probably not use it very much so instead I found an Etsy seller who sells prepunched leaf shapes to use as confetti. No buying paper, no punching, no mess! They arrived quickly and were great.

They seemed like a hit – we had about 8 toddlers at a time doing the craft (on a vinyl tablecloth on the floor) and with their parents helping it all went pretty great! I don’t want to put a picture of anyone else’s kid on a public blog but it was really adorable to see them all hard at work.

drying art

Here are some of the masterpieces drying on the sofa back.

We had a great time and it was wonderful to see our dining room having fun with a big crowd the way it sounds like it used to back in the 1910s.

12711996975_4715cae07c_o

Happy 2nd Birthday to our little forest ranger! We love you!

My favorite photo of the day – our 2 year old and his beloved grandma “Gaga.”

And one last picture… Something about this one just cracks me up.¬†After most everyone had left, we found him munching away on some broccoli and apparently thinking things over. We had a great day – happy birthday little one!

Read Full Post »

So when I left things at the end of part one, we had a dark blue painted front door (no more flower mural), which was a step in the right direction.

But although I was glad to be done with the flower painting, and liked the color (Sherwin Williams Naval) it was still a little unfinished feeling, with sort of a “blank” look to me because of that big wood panel in the middle:

Image

Whenever I’m lucky enough to travel someplace with pretty architecture, I like to take photos of my favorite doors and doorways. One of the loveliest cities in the world for pretty doorways is Bath, near where my husband grew up in England. There are so many gorgeous doors there in all that beautiful Georgian architecture.

Here’s are a few I fell in love with this summer in Bath and Oxford:

Bath Door 1

Bath Door 2

Oxford Door 1

Oxford Door 2

Look at the history! The glassy paint! The great mail-slots and knockers and hand-crank doorbells. In fact, when I couldn’t find anything particularly inspiring in our local hardware stores, my sister in law mentioned a place in Bath called The Knob Connection which specializes in “door furniture” which sounded like a place that took things seriously. And they even have a website! I was thrilled.

Since our house had many years of ownership by a prominent medical family in town, and I think the style is really beautiful and timeless, I was very interested in a “doctor’s knocker” – like on the white door above – these were used to mark the doors of physicians long ago so that in an emergency you could tell where a doctor lived even in a strange town. I love historical quirky things like that, so when my sister-in-law offered to visit the shop for me, I asked her to check out this one in person.

Another one caught my eye too, though, and it’s the one she said was much nicer in person: this “English rose” round knocker. The provided photo really isn’t doing it any favors there, which is why I had initially been looking at the other one more seriously. But my sister-in-law visited the shop and decided to buy it then and there and send it over as my Christmas present, since my husband’s parents were coming over for Christmas, she asked them to pack it and bring it over – it definitely weighed down their luggage, but I’m so glad they brought it!

Although the bolts to mount it are too long for our door, so I really need to shorten them (or buy shorter ones) I went ahead and mounted it right after Christmas. I just laid a piece of paper against the back of it and used a pencil to mark the two places I would need to drill for bolts. Since I really REALLY did not want to mess up the placement of the knocker, I made a color copy of it (just laid it on the scanner bed of our printer/scanner/copier and hit “Color Copy”) for a 1:1 model of it I could reposition lots of times on the front door with tape.

When we got it where we wanted it, and had the holes marked well, it was just a matter of drilling through the door. Again, since this door has a dumb plywood panel as its middle, rather than some gorgeous piece of antique wood, I wasn’t too worried about going through the door.

And drill I did! I really need to get some larger drill bits for our drill, because as it was our largest wasn’t quite large enough and I had to keep wiggling it around to make the hole bigger, which took forever and seemed like a pretty inexact way of doing it.

Nonetheless, I was happy with the results!

knocker installed

When my sister in law bought it the knob-store owner told her that it was cast from a mold of an old Tudor-era door knocker, and that’s why the bottom rose looks worn, because the original one was worn down from years of use. Who knows, but I liked the story. Best Christmas present ever!

The door almost felt done, but when we removed our storm door our mail carrier became concerned because our old mail-slot was very small – about a 4.5″ opening – and he was worried about leaving larger mail outside without the storm door to hold it in. So, because I didn’t want to reattach the ratty storm door, or buy and hang another one, I decided to look for what our options might be for ordering a larger mail slot.

After a little internet research and Pinterest window shopping, I ended up looking at the selection from Signature Hardware. They had at least a few options in various styles for old houses, and the prices were fairly reasonable for solid brass door “furniture.” Since our goal was to have a LARGER opening, the styles were a bit more limited, but we ended up liking this one quite a bit:

post slot from Signature Hardware

It had the larger dimensions we needed and the color seemed somewhat close to the knocker we already had. I noticed in the comments that it was somewhat confusing to install but thought I could probably handle it.

Ha, ha, ha.

While this is a very PRETTY mail slot, and there were instructions available to print from the website, the installation process was incredibly difficult.

You have to cut a hole for the mail to go through, so using our jigsaw I enlarged the current hole. This part was pretty nerve-wracking because it was in the thick, old, wood part of the door rather than the thin plywood part. However, what REALLY made it hard was that the hole had to be WIDER at the top so that the post-flap had clearance to fold in, but narrower in the middle so that the mounting bolts could grab into it. It was NOT well or simply designed at all. Because I was worried about accidentally making the hole too LARGE, I ended up slowly, slowly chipping away at it, holding up the mail slot, chipping away a bit more, holding up the slot again, etc. I ended up hand chiseling quite a bit of the part around the top, which took SO much longer than I had imagined. But finally it was up, albeit in the middle of a big mess of 103-year-old sawdust everywhere.

mail slot installed

I still feel like it could be a slightly better fit, and would like to get a larger drill bit to counter sink the spots where the plate screws in just a bit better, but it’s very stable as is and sometimes good enough is good enough for now. Additionally, the big inner flap is a nice bonus over our old one, which only had a flap inside the front door. This one is large enough for even wide manila envelopes and slim packages to go through. A big change, and we haven’t had any complaints from the mail carrier yet. (Phew.)

post holding mail

The added weight of the brass mail slot even holds outgoing mail, which was never an option before. Kind of neat.

So here’s the door now, knocker and mail slot in place:

front-door-after

Note that strong afternoon sun, the reason the original wood frame was so damaged. Hopefully this new look will last us a long time.

Read Full Post »

This is the story of a door. Part One.

So here’s my confession. During our recent house exterior repainting, we painted over an old wood door. We painted over wood sidelights, and a wood transom.

That’s right, we painted wood. Old wood. Some of it was even pretty wood.

You see, our front door is objectively not great. At one point, we think it must have had a glass panel inset into it. It might have matched the flower pattern in the sidelights and transom. That would have been pretty awesome. But by the time we got this house, the panel of glass Рor whatever it was Рhad been replaced with a big piece of plywood. And the plywood had been painted with a mural of flowers.

Like most people who buy old houses, I love the look of gorgeous old wood. And believe me when I say that I love how our house is full of old wood – the floors, the furniture, the piano.¬†If it were a door like¬†this, you can bet we wouldn’t have been painting over it.¬†I think there’s very little that beats the look of a gorgeous wood door surrounded by painted sidelights and a painted transom. I also really like the look of a painted door with painted sidelights and a painted transom.¬†But the one look I’m not a big fan of is the missing combination above: a painted door with wooden sidelights and a wooden transom.

And that’s what we inherited.

front door before

Here are the issues above, as I saw them:

1) Sun damage to the wood sidelights and door, getting progressively worse from top to bottom. The top third was pretty okay – if it had all been like that we would not have painted it. But compare the wood from the top to bottom:

Image

2) Mural on front door. Again, this is a matter of personal preference, and I’m sure it probably looked nicer 20 years ago when it was first painted, but the sun fading had not been kind to it, and to be honest we just ended up hanging a wreath over it as a cunning disguise 99% of the time.

Image

Mural? What mural?

3) Ugly old storm door missing paint in areas due to bird poo from many years ago, also causing uneven amounts of sun damage to the door (see above image). Closed at a slight angle which caused scratching to the frame, and was not securely lockable against toddler escape.

4) Lack of interesting brass door knocker.

5) Very small mail slot that caused our mail carrier significant amounts of annoyance.

So our options were:

1) Replace the front door with one that was wholly wood and the right era/design for the house. Strip and refinish the wood sidelights and transom, and commit to an annual re-coat with UV protectant to protect them from damage from the strong sunlight on our south-facing porch.

2) Paint it all.

Guess which one won in the budgeting department?

But.

Let’s talk about wood purists for a second. There are people – and I mean a LOT of people – who think that under no circumstances should anyone paint over wood, ever. We even heard cautionary tales from neighbors about that one house where they painted over a wood front door and people are still talking about it fifteen years later. And we were both raised by wood purists. So even though it was a pretty obvious decision from a budgeting perspective, and there are TONS of beautiful painted doors we love and have photographed on our travels, we actually took FOREVER making up our minds about it. It was by far the longest part of the decision making for the entire house, and the thing the two of us went back and forth about the most. We even had the painter paint it halfway and then made him stop so we could be sure that we were sure that we were sure. One of us may have been 39 weeks pregnant at this point – I won’t say who – and perhaps used that as a slight leverage for her (or his) perspective. But it’s all done now.

We decided to paint it.

Based on the popular photo we saw from this post at On Sutton Place, our first color choice was pretty easy: Sherwin Williams Naval. And just four coats later (next time I would definitely go with a TINTED primer to help reduce that number)… here we were:

Image

Coming soon in Part Two (who would ever have guessed the front door would need 2 posts?): the storm door dilemma, the search for an interesting door knocker, and the soul-trying saga of installing the new mail slot.

Read Full Post »

One great moment I almost forgot about from the house painting process:

The side supports for our front steps had been coming apart for years and were in pretty terrible shape:

ImageThis was not the great moment.

Eventually, of course, we’d love to redo the front steps in a beautiful way, and also redo the sloping path to the sidewalk to match. I have a Pinterest board full of inspiration ideas like this one for that project, but unfortunately ours was a budget of realism already stretched, rather than Pinterest dreams.

So, since this poor beat-up little side support and its twin are actually not at all load-bearing or important to the house’s structure, we were thrilled when our painter offered to just clear out the rotted bits, frame up a little piece of wood inside, and patch it all back together so at least things looked whole again.

Image

Aside from the dead February landscaping, much better I think! Thank you, enterprising painter!

But the great discovery was what he pulled out when he was rebuilding it: a piece of the original trim boards, painted a vivid emerald green!

Image

We even joked about its similarity of the Pantone 2013 color of the year, Emerald.

It’s fun to imagine what this house must have looked like, long ago, before the stucco, with its pea green siding (discovered during the chimney rebuild in 2008) and this emerald green trim. Maybe something like this? Oh for a crystal ball.

Other house colors we discovered along the way were mostly in the white-cream-tan-yellow-orange family one would traditionally expect with stucco around here. Here are a few shots we got along the way:

Trim colors through the years:

palimpsest_paint

House body colors (on top of the stucco – the green was all under it) through the years:

palimpsest_paint2

And just as a reminder, here’s what it all looked like before and after our most recent paint job.

Read Full Post »

Older Posts »